Front Bumper & Rear Bumper(16-23 Toyota Tacoma Gen 3rd) - u-Box
Like to Join in Discount List
Name: u-Box Offroad Toyota Tacoma Front & Rear Bumper Combo
* Friendly Reminder :
- Please Double-check All of the Item Pictures to Purchase What you Like
G4201 2016-2023 Toyota Tacoma Gen 3 Front Bumper
Fits 2016-2023 Toyota Tacoma 3rd Gen Models; Cutting Required; Not Compatible w/Factory Sensors
Bumper Weight: About 141 lbs; Built-in winch plate – only fits advanced wireless remote operate winch without a manual clutch handle. Rated up to 12,000 pounds. High Strength D-Ring Mounts Welded Both Inside and Out with 4.75-Ton Capacity. 9500 lbs Rated,3/4" D-Rings w/Rubber Ring for Reducing Friction & Crashing With Bumper; Come with a Light Mounting Port for a 31.5" LED Light Bar; Heavy-Duty, High Tensile 11-Gauge(1/8 Inch) Maximum Steel for the Bumper Main Body, 8-Gauge(11/64 Inch) Maximum for the Structure Mounting Bracket; 3-Piece Design Full-Width Front Bumper; Protects Vehicles from On & Off-Road Debris; Audacious, Angular Off-Road Design with Low-Profile Hoop; Textured Black Powder Coat Finish & Premium E-Coating Process for Corrosion Protection Under Normal Use
Moderate Installation Requires Trimming of The Factory Bumper & Cutting Required
Package Included
- 1 x 3rd Gen Toyota Tacoma Full Width Front Bumper w/Winch Plate
- 4 x 18W LED Spotlights
- 4 x D-rings w/Rubber Ring
- Mounting Hardware
* The item includes two packages: Package A & Package B
G4202 2016-2023 Toyota Tacoma Gen 3 Front Bumper
Fit for 2016-2023 Toyota Tacoma 3rd Gen Models
Bumper Weight: About 69 lbs
One-Piece Design Stubby Front Bumper; Exciting Off-Road Styling. Delicate Hollowed-Out Honeycomb Design on Both Sides.
Heavy Duty, High Tensile 11-Gauge(1/8 Inch) Steel for the Bumper Main Body, 8-Gauge(11/64 Inch) for the Structure Mounting Bracket
High Strength D-Ring Mounts Welded Both Inside and Out with 4.75-ton Capacity. 9500 lbs Rated, 3/4'' D-Rings not Included
License Plate Mounting Bracket Included; Comes with 2×18w Cube LED Spotlights and a 90W LED Spotlight Bar(19.3 in)
Not Compatible with Factory Sensors
Textured Black Powder Coat Finish & Premium E-Coating Process for Corrosion Protection under Normal Use
Simple Bolt-On Installation. No Drilling or Cutting Required
Package Included：
- 1 x Tacoma Front Bumper w/License Plate Mounting Bracket
- 2 × Mounting Bracket
- Mounting Hardware
G4203 2016-2023 Toyota Tacoma Gen 3 Front Bumper
Fit for 2016-2023 Toyota Tacoma 3rd Gen Models
Bumper Weight: About 69 lbs
One-Piece Design Stubby Front Bumper; Exciting Off-Road Styling. Delicate Hollowed-Out Honeycomb Design on Both Sides.
Heavy Duty, High Tensile 11-Gauge(1/8 Inch) Steel for the Bumper Main Body, 8-Gauge(11/64 Inch) for the Structure Mounting Bracket
High Strength D-Ring Mounts Welded Both Inside and Out with 4.75-ton Capacity. 9500 lbs Rated, 3/4'' D-Rings Included
License Plate Mounting Bracket Included; Comes with 2×18w Cube LED Spotlights and a 90W LED Spotlight Bar(19.3 in)
Not Compatible with Factory Sensors
Textured Black Powder Coat Finish & Premium E-Coating Process for Corrosion Protection under Normal Use
Simple Bolt-On Installation. No Drilling or Cutting Required
Package Included：
- 1 x Tacoma Front Bumper w/License Plate Mounting Bracket
- 2 × Mounting Bracket
- 2 × D-rings
- Mounting Hardware Kit
2016-2023 Toyota Tacoma Gen 3 HR Rear Bumper w/License Plate Bracket
Fit for 2016-2023 Toyota Tacoma 3rd Gen Models; Compatible with Factory Back-Up SensorsBumper Weight: About 53 lbs
Heavy Duty 11-Gauge(1/8 Inch) Maximum Steel Construction
Textured Black Powder Coat Finish
One-Piece, Fully-Welded Structure
Works with Factory Receiver Hitches
Pre-Drilled Holes for Back-Up Sensors to Fit Properly. Not Compatible with Blindside Sensors. Professional Installation Is Recommended
License Plate Mounting Bracket Included; Pre-Formed Cut-Outs to Accommodate Factory License Plate Lights
Rear Bumper Provides Adequate Front-End Protection
Integrated Corner Side Steps for Convenient Truck Bed Access
Premium E-Coating Process for Corrosion Protection under Normal Use
Simple Bolt-On Installation w/Detailed Instruction; No Cutting Required to Install
Package Included
- 1 x Tacoma Rear Bumper w/License Plate Mounting Bracket
- 2 x 18W LED Floodlights
- Mounting Hardware
Dimension
Manual Measure. There is a little bit difference. Just for Reference Only.
- G4201 2016-2021 Toyota Tacoma Gen 3 Front Bumper
- G4202 2016-2021 Toyota Tacoma Gen 3 Front Bumper
- G4203 2016-2021 Toyota Tacoma Gen 3 Front Bumper
- 2016-2021 Toyota Tacoma Gen 3 HR Rear Bumper w/License Plate Bracket
